home *** CD-ROM | disk | FTP | other *** search
- Path: cmir.arnes.si!usenet
- From: uljff3@guest.arnes.si (Jernej Pecjak)
- Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.misc
- Subject: Printing speed, please advise
- Date: 10 Feb 1996 10:33:24 GMT
- Organization: Academic and Research Network of Slovenia
- Message-ID: <1563.6614T691T2362@guest.arnes.si>
- NNTP-Posting-Host: ppp1-lj2.arnes.si
- Mime-Version: 1.0
- Content-Type: text/plain; charset=us-ascii
- Content-Transfer-Encoding: 7bit
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
-
- Well, my friend has a Bubble jet Cannon 610. It works great even on 720X720 on
- normal paper, but the printing speed is so slooowww. It seems to affect all the
- printers that I connect to Amiga. When connected to PC they seem to print much
- faster. Now, is this the limitation of the parralel port? If so, would a faster
- parralel port help? Or is this the limitation of processing power (although the
- printing on 060 is still slow when eg. in 600X600 mode - the bitmap is
- processing so slow)? Or is this the limitation of the software? I can ot belive
- that, because Cannon studio seems like a fine program, but can not cope with
- speed.
-
- Any ideas?
-
- Jernej
-
-
- ------------------------------------------------------------------------------
- ____
- /\ |\ /| | | /\ e-mails: uljff3@stenar.arnes.si
- / \ | \/ | | | / \ jernej.pecjak@kiss.uni-lj.si
- / \ | | | |---- / \
- /----\ | | | | | /----\ Editor of Amiga Master
- / \ | | | |____| / \ The Only Slovenian amiga magazine
- ----------------------------------------
- Home is where heart is --- WWW Page: http://www.kiss.uni-lj.si/~k4ff0030
- ------------------------------------------------------------------------------
- Running: A1200, 060/50Mhz, 1.2Gb Hard disk, NEC 3D monitor, 16Mb RAM
-
- System alert: Although I have 16Mb RAM, I am not connected to Microsoft
- ------------------------------------------------------------------------------
-
-